Orders placed before 3pm are sent out the same day.
Skin & Cellular

Buy GLOW Peptide Australia: GLOW 70mg Blend of GHK-Cu, BPC-157 and TB-500

$199
1
Frequently bought together
Bacteriostatic water 3 mL clear glass vial with grey flip-off cap and white Chainwell Peptide label
Bacteriostatic Water3 mL, 3 mL + 1 syringe, 10 mL, 10 mL + 1 syringe, 30 mL, 30 mL + 1 syringe
From $9
U-100 1 mL insulin syringe with 29G needle and long orange needle cap
Insulin Syringe U-1001 mL, 29G 12.7mm, 1 mL, 31G 6mm, 0.5 mL, 31G 6mm, 0.3 mL, 31G 6mm
From $3

Buy GLOW peptide in Australia from Chainwell Peptide as a 70mg lyophilized research vial. GLOW is a three-peptide blend of 50mg GHK-Cu, 10mg BPC-157 and 10mg TB-500, pairing the copper peptide with the two most-ordered tissue repair peptides in one vial, so a protocol that uses all three runs from a single reconstitution.

The GLOW 70 vial holds a blue freeze-dried cake in a 3 mL clear glass vial under a rubber stopper and blue flip-off cap, labelled with all three components, the fill, lot number and expiry. The blue comes from the GHK-Cu, which makes up most of the blend. Every lot is tested by an independent laboratory for identity and purity, and the certificate of analysis matches the lot number on your vial.

Orders paid before 3pm on a business day ship the same day by standard or express post, anywhere in Australia. Add bacteriostatic water to reconstitute. Pay by PayID or bank transfer. For laboratory research use only, not for human or veterinary use.

  • Certificate of analysis for every lot
  • Third-party identity and purity testing
  • Standard or express shipping, sent same day before 3pm
  • Pay by PayID or bank transfer
Strength70 mg
FormLyophilized powder
Vial3 mL glass vial
StorageRefrigerate 2 to 8 °C, protect from light
TestingCOA per lot
View Certificate of Analysis
For laboratory research use only. Not for human consumption.

What Is GLOW Peptide?

GLOW is a pre-mixed research blend of three peptides lyophilized together in one vial: GHK-Cu, BPC-157 and TB-500. It is sold as the GLOW blend, the GLOW stack or GLOW 70, after its usual 70mg fill. The name is generally linked to GHK-Cu, the copper peptide with a long history in skin research.

What sets GLOW apart from most blends is its balance. GHK-Cu is not an equal partner here: it makes up 50mg of the 70mg, roughly 71% of the vial, with BPC-157 and TB-500 at 10mg each. GLOW is best understood as a GHK-Cu vial with the two repair peptides added, rather than an even three-way mix.

What Is in GLOW Peptides?

ComponentAmountWhat it isMain research area
GHK-Cu50mgCopper-binding tripeptide first identified in human plasmaCollagen synthesis, tissue remodelling
BPC-15710mg15 amino acid peptide from a protein in human gastric juiceTendon, gut and soft tissue repair
TB-50010mgSynthetic fragment of thymosin beta-4Actin regulation, cell migration, angiogenesis

Each component has its own page with its research background, linked in the table. What does GLOW peptide do in a study? It lets you look at the three together: GHK-Cu's role in collagen production and remodelling alongside the two peptides most studied in tendon and soft tissue repair.

GLOW 70 Peptide Vial

The Chainwell Peptide GLOW 70mg vial is a 3 mL clear glass vial with a rubber stopper and blue flip-off cap. Its label lists GHK-Cu, BPC-157 and TB-500 under the GLOW name, with the 70mg fill, lot number and expiry.

The cake is blue, and it should be. GHK-Cu carries a copper ion that colours both the powder and the reconstituted solution, and with GHK-Cu making up most of the vial the colour is strong. A pale or white cake in a vial sold as GLOW would suggest the GHK-Cu content is low or missing.

GLOW Peptide vs GHK-Cu

If most of GLOW is GHK-Cu, why not buy GHK-Cu on its own? Because the answer depends on whether your protocol also uses BPC-157 and TB-500. If it does, and at this ratio, GLOW saves two extra vials and two extra reconstitutions. If your work is about GHK-Cu alone, the GHK-Cu 50mg or 100mg vial gives you the copper peptide with nothing else in the solution, which is cleaner for measuring its effect.

GLOW vs KLOW

KLOW contains everything in GLOW plus KPV, an anti-inflammatory tripeptide from alpha-MSH, in an 80mg vial. That is the only difference. Choose GLOW when your protocol uses GHK-Cu, BPC-157 and TB-500, and KLOW when it also calls for KPV. Because ratios vary between suppliers under both names, compare the label and the certificate of analysis, not just the name.

GLOW Stack or Separate Vials?

Order the GLOW stack when your protocol already uses GHK-Cu, BPC-157 and TB-500 together at the 50:10:10 ratio. It means one vial, one reconstitution and one certificate of analysis instead of three. If you need a different ratio, or need to measure each peptide on its own, buy separate vials of GHK-Cu, BPC-157 and TB-500; a blend cannot be rebalanced once mixed. For the two repair peptides without GHK-Cu, see the BPC-157 and TB-500 Blend.

How to Reconstitute GLOW Peptide

Let the vial reach room temperature, wipe the stopper with an alcohol swab, and add bacteriostatic water slowly down the inside wall with a U-100 insulin syringe. Swirl gently until the powder dissolves into a clear blue solution. Do not shake it.

As a worked example, 2 mL of water in the 70mg vial gives 35mg of combined peptide per mL, made up of 25mg GHK-Cu, 5mg BPC-157 and 5mg TB-500 in each mL. Our peptide reconstitution guide and calculator works out other volumes. Keep the reconstituted vial at 2 to 8 °C, protected from light, and use it within 28 days.

Lab-Tested GLOW With a COA for Every Lot

Every Chainwell Peptide GLOW lot is sent to an independent laboratory before release and tested for identity and purity, confirming that all three peptides are present. A lot that does not meet specification is not sold. The lot number on your vial links it to its report on our COA lookup page, and our guide on how to read a certificate of analysis explains each result.

Buy GLOW Peptide in Australia

Chainwell Peptide supplies the GLOW stack peptide in Australia to laboratories, universities and independent researchers, packed and dispatched from within Australia. The best place to buy GLOW peptide is one that tells you exactly what is in it: check that the listing names all three components with their amounts, that the vial carries a lot number, and that the certificate for that lot is available before you pay.

  • Same-day dispatch on orders paid before 3pm on a business day.
  • Australia-wide delivery to Sydney, Melbourne, Brisbane, Adelaide, Perth, Hobart, Darwin and regional addresses, by standard or express post.
  • PayID or bank transfer, with your order number as the payment reference.
  • Tracked orders you can follow on our order tracking page.

The current price is shown at the top of this page, with GST included. GLOW sits in our skin and cellular research peptides range; see our shipping policy for delivery details.

GLOW Peptide Specifications

ProductGLOW peptide blend (GLOW 70)
ComponentsGHK-Cu 50mg, BPC-157 10mg, TB-500 10mg
Fill70mg combined peptide per vial
FormLyophilized (freeze-dried) powder, blue
Container3 mL clear glass vial, rubber stopper, blue flip-off cap
LabelProduct, components, fill, lot number, expiry, research-use statement
TestingIdentity and purity by an independent laboratory, per lot
DiluentBacteriostatic water, sold separately
StorageMinus 20 °C long term, 2 to 8 °C short term, protect from light
ShippingStandard or express post, Australia-wide

Storing GLOW Peptide

Unopened GLOW keeps longest frozen at minus 20 °C in its carton, away from light, or at 2 to 8 °C for work planned within a few weeks. Once reconstituted, refrigerate the vial and use it within 28 days. A solution that turns cloudy or loses its blue colour should not be used. Our peptide storage guide covers handling in more detail.

Research Use Only

None of the three peptides in GLOW is approved by the Therapeutic Goods Administration for any therapeutic use. Chainwell Peptide sells GLOW strictly for laboratory and in vitro research. It is not for human or veterinary use, and we do not provide dosing advice. Two of its components, BPC-157 and TB-500, are on the World Anti-Doping Agency prohibited list. By ordering you agree to our terms and conditions and research use only statement.

GLOW Peptide tools and guides

GLOW Peptide FAQ

What is GLOW peptide?

+

GLOW is a research blend of three peptides in one vial: GHK-Cu, BPC-157 and TB-500. It is usually sold as GLOW 70, with 50mg GHK-Cu and 10mg each of BPC-157 and TB-500. Chainwell Peptide supplies it as a 70mg lyophilized vial for laboratory research.

What is in GLOW peptides?

+

The Chainwell Peptide GLOW vial contains 50mg GHK-Cu, 10mg BPC-157 and 10mg TB-500, for a 70mg total fill. GHK-Cu makes up about 71% of the blend, which is why the powder is a strong blue. All three components are listed on the vial label and confirmed on the certificate of analysis.

What is the difference between GLOW and KLOW?

+

KLOW contains the same three peptides as GLOW, GHK-Cu, BPC-157 and TB-500, plus KPV, an anti-inflammatory tripeptide from alpha-MSH, in an 80mg vial. Choose GLOW when your protocol uses the three peptides, and KLOW when it also calls for KPV.

Should I buy GLOW or GHK-Cu on its own?

+

Buy GLOW when your protocol uses GHK-Cu, BPC-157 and TB-500 together at a 50:10:10 ratio, since it saves two vials and two reconstitutions. Buy the GHK-Cu vial on its own when your work is about the copper peptide alone and you want nothing else in the solution.

How do you reconstitute GLOW peptide?

+

Add bacteriostatic water slowly down the inside wall of the vial and swirl gently until the solution is clear and blue, without shaking. 2 mL in the 70mg vial gives 35mg of combined peptide per mL. Store it at 2 to 8 °C, protected from light, and use it within 28 days.

Where can I buy GLOW peptide in Australia?

+

You can buy GLOW peptide in Australia from Chainwell Peptide as a 70mg lyophilized vial. Every lot carries a lot number matched to an independent certificate of analysis, and orders paid before 3pm on a business day ship the same day by standard or express post.

GHK-Cu 50 mg vial of blue lyophilized copper peptide powder with blue flip-off cap and white Chainwell Peptide label

GHK-Cu

50 mg, 100 mg
From $49
KLOW 80 mg blend vial of blue lyophilized peptide powder with blue flip-off cap and white Chainwell Peptide label

KLOW

80 mg
$139
Glutathione 1,500 mg lyophilized powder in a 10 mL glass vial with amber flip-off cap and white Chainwell Peptide label

Glutathione

1,500 mg
$69
Bacteriostatic water 3 mL clear glass vial with grey flip-off cap and white Chainwell Peptide label

Bacteriostatic Water

3 mL, 3 mL + 1 syringe, 10 mL, 10 mL + 1 syringe, 30 mL, 30 mL + 1 syringe
From $9
U-100 1 mL insulin syringe with 29G needle and long orange needle cap

Insulin Syringe U-100

1 mL, 29G 12.7mm, 1 mL, 31G 6mm, 0.5 mL, 31G 6mm, 0.3 mL, 31G 6mm
From $3
Certificate of analysisThe lot number printed on each vial label matches its COA.
Third-party testingIdentity and purity checked by an independent lab for each batch.
Standard and express shippingTracked delivery Australia-wide, sent the same day before 3pm.